Moon Camp Discovery 2020-2021 Project Gallery

All | Lunar lander | Moon Base | Lunar rover | Rocket | Lunar Orbital Space Station

Lunar Orbital Space Station

Team: Blues 32B

Córdoba    Spain Category: Lunar Orbital Space Station
External link for Tinkercad 3D design

Header (Paloma Domenech)
It is made up of two cylinders, one larger and one smaller, which are joined by a cone, there are some details in the form of rings in the smaller cylinder. The measurements are as follows: 42 meters long, 30 meters wide, and 30 meters high. It has two hatches to access the maintenance of the wings.
Body (Sara Berral)
For the body of the lunar orbital station, two base cylinders have been used. The first, the largest one is 20 meters high and is also 20 meters wide. In this, a small hole was made in the center of one of the sides, for which a much smaller cylinder was needed. To it, another cylinder somewhat smaller than this one was joined in the center, so that part of the other cylinder was still visible in the surroundings. To this last cylinder, the small one, 3 rings were added surrounding them, with an interval of some meters between them, at the beginning and at the end. And between the first and second ring, and the second and third, in each one there are 2 very small half-spheres.
Reactor (Camelia Anguis)
It has four rockets that are accessed by two corridors (upper and lower) to supply fuel. It has four hatches, one to access the body, two for the wings and their maintenance and another to access the rocket corridors. Before reaching the corridors there is a small opening with space for two people (the corridors are for one person) in which they can protect themselves before accessing the nuclear zone (due to the emissions of fuel and fire from the rockets).
The measures are: 37.56 long, 30.00 wide and 30.00 high.
Light metallic color and is made by four cylinders for the rockets, hemispherical for the front, cylinder for the middle and ring for the rear.

Wings1 (Alicia De la Encarnacion)
Front wings created with a filled roof, a filled cube and fifteen hollow cubes, all in dark blue. It has a hatch to access the headboard. The measurements are: 3 meters high, 60 meters long, 28 meters wide/depth.

Wings2 (Sara González de Aguilar)
It was conformed with cubes and blue triangles, and they were all joined together. The measurements are these:
-WIDTH: 30.00
-LENGTH: 70.00
-HEIGHT: 2.00

← All projects

Other projects: